Pentair MYERS S33 Bedienungsanleitung PDF herunterladen (Seite 4)

P. 4

23833A587 Bag #18812A108

P. 5

23833A587 Bag #18812A108

COMPLETE SUBMERSIBLE SUMP PUMP INSTALLATION

Refer to the installation illustrations below and on the

following page for the following instructions. Be certain

sump basin is clean and all power to pump is shut off.

If pump fails to operate properly after installation, refer

to the troubleshooting checklist on page 6 or contact your

Thread male PVC adapter into pump

discharge opening.

Myers distributor. All parts with part numbers are

quality Myers parts.

Tools Needed for All Pump Installation

Pipe wrench, slot screwdriver, hacksaw, round le, drill,

1/8" drill bit, pvc cement.

Cement a 15" piece of PVC pipe to adapter. Use

appropriate diameter piping. Drill a 1/8" relief

hole in the pipe 5" above pump connection.

This hole prevents pump from air-locking.

Clamp Check Valve to top of 15" PVC pipe with

water ow arrow pointing away

from pump.

Lower pump into basin. Clamp needed PVC

discharge pipe and ttings to open end of

Check Valve.

Fill sump basin with water and plug in pump.

Perform several ON-OFF cycles to assure

satisfactory operation.

STEP

3-5/8" Minimum

Retrot

1 2 3 4 5 6 7

Keine Kommentare

Pentair MYERS S33 Bedienungsanleitung Seite 4